IML, INC.

ARTEMUX-25 SCSA

Card Type             Telephony/Network
NIC Type              ATM
I/O Options           MVIP bus
Network Transfer Rate Unidentified
Data Bus              32-bit PCI
Topology              Star
Wire Type             Unshielded twisted pair

[Image]

                                CONNECTIONS

        Function           Label             Function             Label

  Line 1 out                CN1       ATM connector                CN3

  Line 2 out                CN2       DC power in                  JP3

            Note:This card requires an external DC power supply to be
            connected to JP3. For more information, contact the
            manufacturer.

                        USER CONFIGURABLE SETTINGS

                   Setting                      Label        Position

      Line 1 audio output fed through to         JP4          Closed
      audio input

      Line 1 audio output not fed through        JP4           Open
      to audio input

      Line 2 audio output fed through to         JP5          Closed
      audio input

      Line 2 audio output not fed through        JP5           Open
      to audio input

  »   Factory configured - do not alter          JP6         Pins 1 & 2
                                                              closed

  »   Factory configured - do not alter         JP10         Pins 2 & 3
                                                              closed

                           LINE 1 CONFIGURATION

          Setting                    JP1                     JP7

      Subscriber Line         Pins 5 & 6, 7 & 8       Pins 3 & 5, 4 & 6
     Interface Circuit             closed                  closed

     Telephone handset       Pins 1 & 2, 3 & 5, 7     Pins 1 & 3, 2 & 4
                             & 9, 11 & 12 closed           closed

                           LINE 2 CONFIGURATION

          Setting                    JP2                     JP8

       Central Office         Pins 5 & 6, 7 & 8       Pins 3 & 5, 4 & 6
     Interface Circuit             closed                  closed

     Telephone handset       Pins 1 & 2, 3 & 5, 7     Pins 1 & 3, 2 & 4
                             & 9, 11 & 12 closed           closed

                             DIAGNOSTIC LED(S)

     LED         Color         Status                Condition

    LED1         Green           On          ATM is transmitting a cell

    LED1         Green          Off        ATM is not transmitting a cell

    LED2         Green           On           ATM is receiving a cell

    LED2         Green          Off         ATM is not receiving a cell

    LED3          Red            On             On-board CPU halted

    LED3          Red           Off        On-board CPU operation normal

            Note:The exact location of LED3 is unidentified. However, it
            is in the vicinity of its location on the diagram.